Garden Courtyard Wood Gates

Garden courtyard wood gates have natural wood texture and texture, which can add a warm and natural atmosphere to the garden and courtyard, and integrate with the surrounding plants and landscape. Its color choice is rich
Garden courtyard wpc gates can be customized according to different courtyard styles and personal preferences, such as common wood color, brown, gray, etc., can not only create a retro, elegant style, but also show a modern, simple temperament. In addition, it can also carry out a variety of modeling design, such as European style carved doors, Chinese style lattice doors, etc., to meet different aesthetic needs.
 

Mix and stir
- Garden courtyard wood gates ,the prepared wood fibers, plastic particles and additives are put into a high-speed mixer in a certain proportion for mixing. During the mixing process, it is necessary to strictly control the mixing speed and time, so that various raw materials are fully and evenly mixed to form a wood-plastic mixture with good plasticity and fluidity.
 

Extrusion molding

- The mixed wood plastic mixture is fed into the extruder. By heating and rotating the screw, the extruder makes the mixture gradually plasticized in the barrel to reach the flow state. Then, under the push of the screw, the plasticized material is extruded through the mold of a specific shape to form the basic profile of the wood-plastic door. In the extrusion process, it is necessary to precisely control the extrusion temperature, speed and pressure parameters to ensure the dimensional accuracy and surface quality of the profiles.
 

Cooling setting

- The wood-plastic profile extruded from the mold has a high temperature and a certain plasticity. In order to make it quickly set and obtain a stable size and shape, it needs to be cooled by a cooling device. There are two common cooling methods: air cooling and water cooling, generally using air cooling for initial cooling, and then further cooling through water cooling, so that the profile quickly cools to about room temperature.
 

Cutting process

- According to the size requirements of the actual door, use cutting equipment to cut the wood-plastic profile after cooling and shaping to the appropriate length. During the cutting process, the cutting accuracy should be ensured to avoid dimensional deviation. For some wood-plastic doors that require special shapes or structures, further cutting processing may also be required, such as tenoning, grooving, etc., for subsequent assembly.